DTS XD10 Especificações descarregar pdf (Página 83)

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0

B.2. Brackets for the DTS Timecode Reader Head, 35mm and 70mm

• D614 - Standard Bracket (35mm only) – cannot be used with breakaway plates

For projectors: Century, Simplex, and Cinemeccanica with Kelmar bracket (below). Intended to

fit between the projector and reel arm. We have produced the bracket with the American standard

size hole to accommodate 2 inch center spacing 3/8 - 16 tap, that is utilized to mount the

American-made upper reel arms. Comes with the following hardware:

Qty Description

2 10 x 24 x ½” long screw

2 ¾ x 16 x 1” long hex bolt nut

2 3/8” lock washer

• D615 - DP70 Universal Bracket (35mm only)

Used for American projectors with a penthouse. Comes with tap and drill bit 8-32, and the

following hardware:

Qty Description

2 10 x 24 x ½ in. long screw

2 ¾ x 16 x 1 in. long hex bolt nut

2 3/8 in. lock washer

• D616 - AA2 bracket (35mm only)

For Norelco AA projectors. Comes with the following hardware:

Qty Description

2 #10 lock washers

3 5/16 in. x 18 x 5 in. long screws

3 3/8 in. split ring lock

2 10 x 24 x ½ in. long screw

• D617 - DP75 Bracket (35mm only)

Used to mount the DTS timecode reader head to the side of the projector. Comes with same

hardware as the D614. See also D628 - “L” adapter panel, below.

• D622 - Front Mount Bracket (35mm only)

Used when installing multiple digital sound heads or when there is not enough room to lift the

projector arm. Used with Dolby SR-D

and Sony SDDS

reader heads.

• D625 - 35mm / 70mm Standard Bracket – used with breakaway plates.

For projectors: Century, Simplex, and Cinemeccanica with Kelmar bracket (see below).

Intended to fit between the projector and reel arm. We have produced the bracket with the

American standard size hole to accommodate 2” center spacing 3/8 - 16 tap, that is utilized to

mount the American made upper reel arms. Comes with the following hardware:

Head Qty Description

35mm 2 10 x 24 x ½ in. long screw

35mm 2 ¾ x 16 x 1 in. long hex bolt nut

35mm /

70mm

2 3/8 in. lock washer

70mm 2 3/8 x 1-1/2 in. long cap screws

70mm 2 3/8 in. flat washers

70mm 2 3/8 in. hex nuts

Installation Diagrams Document #: 9301E692001.0

B-3

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 151 152

Comentários a estes Manuais

Sem comentários

DTS XD10 Especificações Página 83

Comentários a estes Manuais