DTS XD10 Especificações descarregar pdf (Página 129)

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0

Figure 10. Connect cables.

As a safety precaution, the addition of a safety cable to secure the DTS-EMA is highly recommended. In case

of earthquake or mounting plate failure, the projector assembly will be prevented from falling to the floor.

Use any spare hole on the DTS-EMA to secure the assembly to the ceiling or wall.

G.5.3. Programming the DTS-CSP Subtitle Projector

1. Remove the lens cap and press the green ☼ POWER button to power on the projector.

2. Verify Lamp Life Counter.

a. On the DTS-XD10, press the ENTER button to access the MAIN menu.

b. Press the ▼ button and scroll to PLAYBACK, then press the ► button.

c. Once in PLAYBACK menu, press the ▼ button and scroll to CSP LAMP STATUS.

d. Press the ► button to view lamp life hours. It should be at zero [0]. If not at zero, see the

topic Reset the Lamp Hour Counter on page A-G-20 to reset the counter.

e. Press ENTER button to save selection and return to the main screen.

3. Set the Douser type of the projector.

a. From the XD10 MAIN menu, press the ▼ button and scroll to SETUP. Press the ► button.

b. Once in SETUP, press the ▼ button and scroll to CSP SETUP. Press the ► button.

c. Once in the CSP SETUP, press the ▼ button and scroll to OPTIONS. Press the ► button

and select DOUSER TYPE.

d. Once in DOUSER TYPE, press the ▼ button to scroll to “Electronic” (unless your douser is

the older mechanical model, in which case you should choose “Mechanical”). Press ENTER

button.

e. Press the ▼ button and scroll to EXIT. Press ENTER button to save selection and return to

the main screen.

4. Set the Light Intensity of the projector.

a. From the XD10 MAIN menu, press the ▼ button and scroll to SETUP. Press the ► button.

Cinema Subtitling (CSS) Option Document #: 9301E692001.0

G-13

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 151 152

Sem comentários

DTS XD10 Especificações Página 129