DTS XD10 Especificações descarregar pdf (Página 114)

XD10 Cinema Media Player, Installation and Operating Guide Version X1.0

Figure F-1. XD10, Cover Removed

3. Remove the metal cover over the PCI slot that is second from the left side of the unit (Figure F-1,

above). Keep the screw.

4. Discharge static by touching the XD10 chassis

5. Insert the video card in PCI slot. Make sure the card is firmly seated into the slot. Reinstall the

screw.

6. Depending on whether you are using the CSS option:

a. If NOT using CSS

, connect the “Projector Video” socket on the back of the XD10 to the 15

pin end of the “overlay cable”.

10-ch Playback

card in PCI 3

ideo card goes

into PCI 2

b. If using CSS, connect the “Projector Video” on the XD10 to “video in” on the splitter using

the extra video cable (item 8.b under Required Components, previous page). Then install the

15 pin end of the “overlay cable” into the “video 1” output of the splitter. CSS connects to

“video 2” output of the splitter. The splitter must be powered by the 12 VDC transformer

(wall adapter) that is supplied.

c. In either case

, connect the small end of the “overlay cable” to the “VGA IN” on the bottom of

the video card, being especially careful to ensure a good connection.

7. Connect the audio cable from the video card’s “digital out” to the input marked “VID” on the 10-

ch Playback card in PCI 3 (the card nearest the left side in Figure F-1, above).

PRELIMINARY Information Document #: 9301E692001.0

F-2

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 151 152

Sem comentários

DTS XD10 Especificações Página 114