DTS XD10 Especificações Página 141

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 152
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 140
XD10 Cinema Media Player, Installation and Operating Guide Version 1.0
4. Verify the XD10 TIMECODE indicator is lighted.
5. Verify the XD10 NARRATION indicator is lighted.
6. Enable DTS-CSS self-play test “1K @ -20dB FS”. Verify 300mV RMS (±10mv) output at
NARR OUT.
If no output, replace the E622 board. If there is output, refer to the transmitter manufacturer for
test procedure.
Narration sounds too loud/soft
Note: Volume controls are usually on each individual headset.
Enable XD10 self-play test “1K @ -20dB FS”. Verify 300mV RMS (±10mv) output at NARR
OUT. If no output, replace the E622 board. If there is output, refer to the transmitter
manufacturer for test procedure.
Narration sounds distorted
1. Enable XD10 self-play test “1K @ -20dB FS”. Verify 300mV RMS (±10mv) output at NARR
OUT.
2. Enable the XD10 self-play test “Buzz And Bill” and listen with the narration headsets.
3. Try replacing the internal E622 board.
4. Refer to the transmitter manufacturer for test procedure.
Noise in narration track
1. Verify the NARR OUT cables are not routed next to power lines, film projector motors, or
fluorescent lights.
2. If getting RF interference, contact DTS for ferrite beard suppressors that attach to the audio
output cables.
The narration is NOT playing in sync with the sound track or action on-screen
Go to the XD10’s Setup | Timecode Reader menu to verify the offset value has been correctly set. If
necessary, see Timecode Reader Sync Adjustment (chapter 3).
Forgot Password
Contact DTS.
G.12. Testing Subtitles
1. Play the test film “Bill and Buzz”.
2. Verify the subtitles are synchronized with the film. If NOT, the most likely problem is the
timecode reader offset is incorrect. (If adjustment is needed, see TC Reader Offset, in chapter 1,
for details.)
3. Verify the subtitles are positioned correctly on the screen. (If adjustment is needed, see CSP
Setup in chapter 1.)
G.13. Testing Narration
Equipment needed: Voltmeter
1. Disconnect the XD10 Narration cable from the rear of the XD10.
Cinema Subtitling (CSS) Option Document #: 9301E692001.0
G-25
Vista de página 140
1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 151 152

Comentários a estes Manuais

Sem comentários