DTS PRO Series Guia do Utilizador Página 30
- Página / 108
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
DTS-HD Master Audio Suite™,
User Guide
v 2.5
Confidential - Do NOT Duplicate 22 DTS Document No.: 9301F55800D
17781 v1
48 kHz
7.2.6 Input Files
The Input Files that are required for the encoding process must be loaded into this section of the user
interface (see Figure 7-5 and Figure 7-6). Input files may be loaded either by drag-and-drop into the
appropriate text field or by double-clicking on the text field and selecting the source files from the file
browser window. All active channels should be populated with mono or stereo audio input source files.
The selected channel layout determines which audio input fields must be populated. Supported audio
input file types include LPCM wave, Broadcast LPCM wave (.wav) files, and LPCM Audio Interchange
File Format (.aif).
The labels running vertically on the left side of the Input Files window pane from top to bottom
correspond to the active channels of the selected channel layout. If a channel is not active, then that row
will not be selectable. The labels will change dynamically to reflect the channel layout that is selected.
The column to the right of the Files text boxes labeled ‘Ch’ specifies which channel of the input material
will be used in the encoding processing. If a stereo input file has been entered, Left (‘L’) or Right (‘R’)
will appear in the column. An ‘M’ will be displayed if the input source material is a mono file.
The column labeled ‘Bw’ specifies the bit-width of the source file. Typically this value is 16 or 24 bits.
The column labeled ‘Fs’ specifies the sample rate (F = frequency, s = sample) of the input material. The
column labeled ‘Duration’ denotes the length of the input file in HH:MM:SS.MSEC where HH denotes
hours, MM denotes minutes, SS denotes seconds and MSEC denotes milliseconds.
If a desired input file is incorrect, positioning the mouse over the file and clicking the right mouse button,
will display a pop-up menu showing a “CLEAR” button. Selecting this button will clear out all of the
values in columns (i.e. Bw, Fs, and Duration) associated with the selected file. If you need to clear all of
the input files, the “Clear All” button will clear all of the input files in one step.
Note: Input files may have varying durations. The encode process will encode up to the
longest file duration. For example, in Figure 7-6, the input files have duration of
00:00:10.000 and 00:00:30.030. The process will create an encoded file up to 00:00:30.030
in length. The shorter files will be padded out with 0’s (-INFdB).
Note: The input source material may be 16-bit or 24-bit resolution mono or stereo in ‘.wav’
‘.aif’ or ‘.aiff’ format only.
- DTS-HD Master Audio Suite™ 1
- User Guide 1
- 1. Introduction 9
- 2. System Requirements 11
- 2.4 iLok Usage 12
- 2.5 Port Assignments 12
- 4. Uninstall Instructions 16
- 7.1 Main Menus 22
- 7.2 Audio Panel 25
- 7.3 Bitstream 41
- 7.4 Downmix Panel 48
- 7.5 Encode Queue 54
- 7.6 Log Files 56
- 9. DTS-HD StreamPlayer 60
- 10. DTS-HD StreamTools 61
- 10.1 Join/Replace Tool 63
- 10.2 Append Tool 68
- 10.3 Trim Tool 70
- 10.4 Split Tool 72
- 10.5 Restripe Tool 74
- 10.6 Add Silence Tool 75
- 10.6 File Info Tool 76
- 10.7 Verify Tool 78
- 10.8 Peak Bit Rate Analysis 81
- 11. Encoder Error Codes 84
- 12. DTS Tools Error Codes 87
- Timecode Error Codes 88
- 17781 v1 91
Manuais e produtos relacionados com Redes DTS PRO Series
Redes DTS PRO Series Especificações
(15 páginas)
(15 páginas)
Redes DTS PRO Series Guia do Utilizador
(18 páginas)
(18 páginas)
Redes DTS PRO Series Manual do Utilizador
(28 páginas)
(28 páginas)
Electrolux EGT46342NK manuály
Uživatelské manuály a uživatelské příručky pro ne Electrolux EGT46342NK.
Poskytujeme 3 manuály pdf Electrolux EGT46342NK ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais