DTS Raptor Manual do Utilizador

D.T.S. Illuminazione s.r.l.Via Fagnano Selve 10/12/1447843 Misano Adriatico (RN) ITALIA Tel +39 0541 611131 Fax +39 0541 611111 [email protected]

10 7- MOUNTING / REPLACING THE LAMP AND LAMP ALIGNMENT WARNING Turn off the lamp before opening the unit head covers. Never look directl

11 1) Loosen the 3 “¼ turn” screws which fix the head covers on both sides (picture 1) . 2) Once loosened the screws, simply lift the covers to acc

12 4) Using a phillips screwdriver, loose the 4 screws A, B, C, D and remove the lamp fan assembly (picture 5).

13 6) Remove the cable connectors from the old lamp and apply them on the new lamp (picture 8).

14 Lamp Alignment Attention: we recommend to align the lamp in the optical system to avoid overheating of the dichroic filters and other component

15 8- VOLTAGE AND FREQUENCY The RAPTOR with electronic ballast can operate at 90-260V 50 or 60 Hz. 9- INSTALLATION RAPTOR may be either floor o

16 9.1- Safety cable We recommend the use of a safety cable or chain connected to the RAPTOR and to the suspension truss in order to avoid the fi

17 15M 9.3- Movement RAPTOR FPR (03.MB005.EB.LFP) Unlimited Pan rotation; Tilt 270° (1,2 sec.) . RAPTOR (03.MB005.EB.L) Pan 540° (2,3 sec.); Tilt 27

18 10- MAINS CONNECTION RAPTOR with electronic ballast operate at 90-260V 50-60 Hz. Prior to connecting the unit to your mains supply, ensure

19 11- DMX SIGNAL CONNECTION The unit operates using the digital DMX 512 (1990) signal. Connection between the mixer and the projector or between

2 Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità pe

20 11.1-DMX Addresses RAPTOR can be controlled with 18 DMX channels. In order to use the unit in 18 channels, set the following addresses on the mi

21 MENUENTERDOWNUP13- DISPLAY FUNCTIONS DISPLAY FUNCTIONS The RAPTOR display panel shows all the available f

22 WARNINGPLACE THE PROJECTOR AT LEAST 15mt (49’ 21’’ ft) AWAY FROM THE OBJECTS AND PEOPLE LIT BY ITS LIGHT BEAM.MENU ENTER DOWN UPWARNINGREAD WITH

23 FLIPLAMPFLIPLAMPADJUSTUPUPDOWNDOWNENTERENTERMENUMENUBY DMXMENU ENTER DOWN UPENABLEDBY DMXRESET 13- DISPLAY FUNCTIONS Dis

24 SYSTEM INFOLAMP LIFE:0087H STRIKE:045UNIT LIFE: 0099H9M R.17PT R.24MODEL: RAPTOR FPRMENU ENTER DOWN UP13- DISPLAY FUNCTIONS

25 MENU ENTER DOWN UPERRORFROSTMENU ENTER DOWN UPERRORPRISMMENU ENTER DOWN UPERRORSMOOTH Default

26 MENU ENTER DOWN UPMOTORS ALIGNMENT127DEFAULT CAL.MENU ENTER DOWN UPSET ALL MOTORS AT 128POWER SETUPMENU ENTER DOWN UP SHOW HIDDEN SETTINGSCALIBRA

27 CALIBRATIONCOLOUR WHEELMENU ENTER DOWN UPMOTORS ALIGNMENT111CALIBRATIONFROST ZEROMENU ENTER DOWN UPMOTORS ALIGNMENT61CALIBRATIONFIXED GOBOMENU EN

28 LAMP FAN AUX 1ENTER DOWN UPAT 330W 1=13V 12=24V6MENUBASE FANSMENU ENTER DOWN UP1=13V 12=24V3BALLAST FANSMENU ENTER DOWN UP1=1

29 16- PAN SPEED & TILT SPEED You can set the PAN and TILT motors at high speed on your RAPTOR. Press menu until you see PAN SPEED / TILT SPEED

3 INDEX: 1- SYMBOLS 4

30 18- PERIODIC CLEANING 18.1- Lenses and reflectors Even a fine layer of dust can reduce the luminous output substantially. Regularly clean all

31 20- DMX PROTOCOL 18 CHANNELS MODE 1 PAN msb 2 PAN lsb 3 TILT msb 4 TILT lsb 5 SPEED MOVEMENT 6 PAN FAR (Active only on

32 DMX CHANNEL 1 Parameter: PAN msb DMX CHANNEL 2 Parameter: PAN lsb DMX CHANNEL 3 Parameter: TILT msb DMX CHANNEL 4 Parameter: TILT lsb DMX CHA

33 DMX CHANNEL 7 Parameter: DIMMER DMX value Function 000-007 Black-out 008-255 Proportional dimmer DMX CHANNEL 8 Parameter: SHUTTER DMX value Fu

34 DMX CHANNEL 9 Parameter: COLOUR IF CHANNEL 10 = FULL COLOUR (DMX range value 0-63) DMX value Function 000-013 Colour 1 014-027 Colour 2 028-041 C

35 IF CHANNEL 10 = PROPORTIONAL COLOUR (DMX range value 128-191) DMX value Function 000-010 No colour 011-255 Proportional colour IF CHANNEL 10 = R

36 DMX CHANNEL 12 Parameter: FIXED GOBO SHAKE DMX value Function 000-009 Stop 010-016 Gobo shake R-L speed 1 017-023 Gobo shake R-L speed 2 024-030

37 DMX CHANNEL 14 Parameter: SMOOTH DMX value Function 000-127 No function 128-255 Smooth inserted DMX CHANNEL 15 Parameter: PRISM DMX value Fu

38 1234567891011121314151617021- FIXED GOBO WHEEL

39 COLOUR 17COLOUR 16COLOUR 15COLOUR 14COLOUR 13COLOUR 12COLOUR 11COLOUR 10COLOUR 9COLOUR 8COLOUR 7 D.T.S. Code: D.T.S. Code: D.T.S. Code: D.T.S

4 1- SYMBOLS Graphic symbols used on this manual: THIS SYMBOL INDICATES A HOT SURFACE THIS SYMBOL INDICATES ELECTRIC SHOCK RISK TH

40 The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any

5 2- GENERAL WARNING Read the instruction contained in this user manual carefully, as they give important information regarding safety during insta

6 4- TECHNICAL FEATURES Overview RAPTOR is the most compact Beam moving head on the market: just 37 cm x 50 cm. RAPTOR projects the most powerfu

7 4- TECHNICAL FEATURES Interface / Control / Programming LCD graphic display (control / management / monitoring of the main parameters) 4 soft-k

8 4- TECHNICAL FEATURES Dimensions Packaging Dimensions (LxWxH) Unit Dimensions (LxWxH) 420 x 440 x 580 mm 368x288x538mm Weight: 18,9

9 6- IMPORTANT SAFETY INFORMATION 6.1 Fire prevention: RAPTOR uses a Osram Sirius HRI 330W lamp. The use of any other alternative lamp is not re